Broseley Petite Manual de Serviço

© 2007-2008 Broseley Fires Ltd INSTALLATION AND OPERATION INSTRUCTIONS FOR THE: SUPREMA GRANDE & SUPREMA PETITE Wood Burning Range Style C

© 2007-2008 Broseley Fires Ltd 1019. INSTALLATION OF THE APPLIANCE THIS APPLIANCE MUST BE INSTALLED AND COMMISSIONED BY A FULLY QUALIFIED, REGISTERE

© 2007-2008 Broseley Fires Ltd 1122 FLUE TERMINATION The height and termination of the flue is an important part of the installation and cons

© 2007-2008 Broseley Fires Ltd 12STOVE CLEARANCES TO NON FLAMMABLE MATERIALS • The minimum distance from any NON FLAMMABLE object, or one that is NOT

© 2007-2008 Broseley Fires Ltd 1329 ASSEMBLING THE HANDRAILS

© 2007-2008 Broseley Fires Ltd 14ANNUAL SERVICE RECORD A “Declaration of Completion” Certificate must be obtained for the installation and retained b

© 2007-2008 Broseley Fires Ltd 15 LIMITED WARRANTY A “Declaration of Completion” Certificate must be obtained for the installation and retained by

© 2007-2008 Broseley Fires Ltd 2INTRODUCTION Please read the following instructions carefully to get the best from your new purchase. Congratulation

© 2007-2008 Broseley Fires Ltd 3 1. TECHNICAL DATA SUPREMA GRANDE SUPREMA PETITE Nominal Heat Output (kW) 10 8 Flue diameter (MINIMUM) *an adapto

© 2007-2008 Broseley Fires Ltd 4 5 THE ‘AIR’ CONTROLS The stove is fitted with four manual air controls that adjust the flow of air into the unit.

© 2007-2008 Broseley Fires Ltd 5 5 C OVEN / HOTPLATE CONTROL (spinner) see FIG 1 C On the front of the cooker; midway between the primary and seco

© 2007-2008 Broseley Fires Ltd 68 THE LIFTING GRATE The Suprema Grand has a grate that can be raised and lowered by means of a crank. A crank

© 2007-2008 Broseley Fires Ltd 710 INITIAL BURNING AND CURING OF THE APPLIANCE The first time that the appliance is lit, there will be an odour give

© 2007-2008 Broseley Fires Ltd 813 ASH REMOVAL – CLEANING OUT THE ASH The removal of the ashes should be done when the appliance is cold. Ash must

© 2007-2008 Broseley Fires Ltd 917 C CAST IRON This can be cleaned with a lint free damp cloth. Do not leave this surface wet as it will go rusty.