
Introduction
May we take this opportunity to thank you for choosing one of our stoves. These
appliances are designed to burn wood logs and wood derived fuels. It is essential that your
wood has been seasoned to ensure that it is sufficiently dry for burning. You can determine
the moisture content of your logs by using a digital moisture meter, your logs need to be
below 20% moisture content before they are considered dry enough for burning.
Never burn wood that contains paint, glue or any other chemicals
See the section “Lighting the Stove” for further details. After reading this document, if there
is anything you are unsure about, please contact your dealer or our Technical Support
Department.
These instructions cover the basic principles to ensure the satisfactory installation of the
stove, although detail may need slight modification to suit particular local site conditions. In
all cases the installation must comply with current Building Regulations, Local Authority
By-laws and other specifications or regulations as they affect the installation of the stove.
It should be noted that the Building Regulations requirements may be met by adopting the
relevant recommendations given in British Standards BS 8303, BS 6461 and BS 7566 as
an alternative means to achieve an equivalent level of performance to that obtained
following the guidance given in Approved Document J.
Please note that it is a requirement under the Broseley Fires warranty system that
the installation of the stove is carried out by a Competent Person registered with a
Government approved Competent Persons Scheme. HETAS Ltd operate such a
Scheme and a listing of their Registered Competent Persons can be found on their
website at www.hetas.co.uk
.
Packing List
eVolution 4 eVolution 7
1x Cast Iron/Steel Stove 1x Cast Iron/Steel Stove
1x Rear Firebrick 1x Rear Firebrick
1x Baffle 2x Baffles (1 Steel 1 Vermiculite)
2x Side Firebricks 4x Side Firebricks
1x Spigot 1x Spigot
1x Grate & Ash Pan 1x Grate & Ash Pan
1x Gloves & Ash Tool 1x Gloves & Ash Tool
1x Instruction Booklet 1x Instruction Booklet
All parts will be inside the main stove body upon delivery, apart from the spigot which will
be bolted to the stove.
MS11-11 Issue 3 3
Comentários a estes Manuais